ROKI TECHNO
Menu

Products and Services

Filter Housing

Search by Application

ROKI TECHNO’s filter housing can be used in a wide range of production processes.
Click on a set of applications to see the list of housing products available for that set of applications.

Search by application: Electronics applications

The table below shows a list of our filter housing products available for electronics applications.
Click on a product ID to download its PDF catalog.
In addition to the products below, we can also customize special specifications. Please consult us for details.

Housing ID Product appearance Housing configuration Applicable filter No. of filters attached Main housing material Interior surface finish Design pressure (MPa at 40˚C) Features
RA/RB
RA/RB
 General single type CZ、PZ、F 1 ABS＋AS - 0.49MPa
  • Lightweight
  • Excellent cost performance
  • The transparent housing allows you to check the level of dirtiness of the filter from outside.
RC
RC
 General single type CZ、PZ、F、0 1 Polypropylene - 0.49MPa
  • Lightweight
  • Excellent cost performance
  • Excellent chemical resistance
GA
GA
 General single type CZ、PZ、F 1 SUS304 Pickling 0.49MPa
  • Only a small space is required to remove the shell for the replacement of cartridges.
  • Easy disassembly
GB
GB
 General single type CZ、PZ、F、0 1 SUS316 Pickling 0.49MPa
  • Easy disassembly thanks to the adoption of clamp band
  • Resistant to highly corrosive liquids due to the use of SUS316
GEX-WO
GEX-WO
 General single type CZ、PZ、F 1 SUS304 Buffing
(#400）		 0.69MPa
  • Designed to minimize the stagnation of liquid
  • Minimal loss of liquid
  • Only a small space is required to remove the shell for the replacement of cartridges.
GEX-PLY
GEX-PLY
 General single type 0、Y 1 SUS304 Buffing
(#400）		 0.69MPa
  • The stagnation of liquid is minimized thanks to the inline-type design.
  • Minimal loss of liquid
  • Easy disassembly and excellent washability thanks to the adoption of clamp band
GEX-TA
GEX-TA
 General multiple type CZ、PZ、F 3、6 SUS304 Buffing
(#400）		 0.69MPa
  • Designed to allow liquid to flow evenly from the top of the filter
  • The amount of residual liquid is minimized.
  • Easy disassembly and washing of the components
GY/GZ
GY/GZ
 General multiple type For GY:
CZ、PZ、F
For GZ:
CZ、PZ、F、0		 3、6 SUS304 Pickling 0.49MPa
  • Easy installation/removal thanks to the adoption of clamp band
  • All the inner parts of the GY are made of stainless steel.
SMC
SMC
 General multiple type CZ、PZ、F、0、
5、7		 3～60 SUS304 Pickling 0.69MPa
  • Can be used for a wider range of applications
  • Due to the mechanism where the spring top seal is pressed down by the own weight of the lid to set the filter in place, the number of inner parts has been reduced.
SHC
SHC
 High-pressure single type CZ、PZ、F 1 SUS304 Pickling 1.18MPa
  • Can be used in high-pressure lines
SSC
SSC
 Sanitary single/multiple type 0、5、7 1、3、6、
12、24、36		 SUS304 Buffing
(#400）		 0.69MPa
  • Easy-to-disassemble and easily washable sanitary-type housing
UD
UD
 Laboratory single type Y 1 SUS304 Buffing
(#400）		 0.49MPa
  • Compact design
  • Ideal for the filtration of a small amount of evaluation liquid